TThe Traveling Tradesman
← All trades
G

Glazier

No state licenses individual glaziers. It's a registered-apprenticeship trade, typically four years and 8,000 hours through the Painters and Allied Trades, and that certificate carries nationwide without a transfer process. The line that matters is the same one running through every finishing trade here: work for someone else's licensed outfit and you need nothing, but contract directly with customers and glazing may require a specialty contractor license.

Across all states: glazier is not a state-licensed occupation for individual workers in any US state. It is a registered-apprenticeship trade - typically 4 years, with the International Union of Painters and Allied Trades (IUPAT) program consisting of 8,000 hours of on-the-job training plus 4 years of classroom education. The National Glass Association also offers apprenticeship programs, as do trade associations and local contractors' associations. Important contractor-level distinction: while the individual glazier needs no license, a glazing contractor may need a specialty contractor license - California, for example, has a c-17 Glazing classification through the CSLB. This is the same employee-vs-contractor line documented for carpentry, masonry, and sheet metal elsewhere : work for someone else's licensed outfit and you generally need nothing; contract directly with customers and the state's contractor licensing applies.

Where can I take my glazier license?

Pick the state you're licensed in. You'll get the states that will consider that license — which is not the same as a free transfer.

FAQ

Do I need a license to install glass?

Not as an employee — no state licenses individual glaziers anywhere. Contracting directly is the different question, and California is the clearest example: it issues a C-17 Glazing specialty classification, so a glazing business needs that or a general building license, while the glaziers working under it need nothing. Elsewhere glazing usually folds into general contractor licensing, which means the threshold and rules are whatever your state sets for contractors generally. Your apprenticeship certificate stays portable throughout — it's the business credential that's state-bound, not you.

Glazier rules in every state

Researched 2026-07-21 to 2026-07-24

One entry per state, in alphabetical order. Each one covers who licenses the trade there, what it takes to qualify, and whether that state accepts a license earned somewhere else.

What the colors mean
  • Reciprocity — accepts some out-of-state licenses
  • No reciprocity — licensed here, but no out-of-state license is accepted
  • Nothing to reciprocate — no state license exists here
  • Not established — we could not verify this state's position — treat it as an open question, not a no
  • secondarydrawn from consistent secondary sources, not confirmed on the agency's own page

Alabama

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Alabama regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Alabama's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Alabama does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Alabama issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Alabama→

Alaska

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Alaska regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Alaska's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Alaska does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Alaska issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Alaska→

Arizona

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Arizona regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Arizona's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Arizona does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Arizona issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Arizona→

Arkansas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Arkansas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Arkansas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Arkansas does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Arkansas issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Arkansas→

California

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. California regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is California's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals. California specific: the CSLB issues a C-17 Glazing specialty contractor classification. An individual glazier working for a licensed contractor needs no credential, but contracting glazing work directly requires C-17 (or a General Building license). CSLB'S standard reciprocity program with Arizona, Louisiana, Mississippi, Nevada, and North Carolina may apply to C-17, subject to the classification appearing on the Reciprocal Classifications List - verify rather than assume, since this dataset's CA roofer and mason records show CSLB lists differ by classification.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

California does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because California issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in California→

Colorado

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Colorado regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Colorado's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Colorado does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Colorado issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Colorado→

Connecticut

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Connecticut regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Connecticut's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Connecticut does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Connecticut issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Connecticut→

Delaware

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Delaware regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Delaware's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Delaware does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Delaware issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Delaware→

Florida

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Florida regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Florida's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Florida does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Florida issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Florida→

Georgia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Georgia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Georgia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Georgia does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Georgia issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Georgia→

Hawaii

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Hawaii regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Hawaii's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Hawaii does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Hawaii issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Hawaii→

Idaho

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Idaho regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Idaho's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Idaho does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Idaho issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Idaho→

Illinois

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Illinois regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Illinois's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Illinois does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Illinois issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Illinois→

Indiana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Indiana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Indiana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Indiana does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Indiana issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Indiana→

Iowa

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Iowa regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Iowa's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Iowa does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Iowa issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Iowa→

Kansas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Kansas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Kansas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Kansas does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Kansas issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Kansas→

Kentucky

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Kentucky regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Kentucky's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Kentucky does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Kentucky issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Kentucky→

Louisiana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Louisiana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Louisiana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Louisiana does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Louisiana issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Louisiana→

Maine

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Maine regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Maine's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Maine does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Maine issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Maine→

Maryland

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Maryland regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Maryland's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Maryland does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Maryland issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Maryland→

Massachusetts

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Massachusetts regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Massachusetts's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Massachusetts does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Massachusetts issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Massachusetts→

Michigan

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Michigan regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Michigan's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Michigan does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Michigan issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Michigan→

Minnesota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Minnesota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Minnesota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Minnesota does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Minnesota issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Minnesota→

Mississippi

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Mississippi regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Mississippi's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Mississippi does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Mississippi issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Mississippi→

Missouri

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Missouri regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Missouri's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Missouri does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Missouri issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Missouri→

Montana

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Montana regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Montana's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Montana does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Montana issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Montana→

Nebraska

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Nebraska regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Nebraska's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Nebraska does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Nebraska issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Nebraska→

Nevada

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Nevada regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Nevada's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Nevada does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Nevada issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Nevada→

New Hampshire

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. New Hampshire regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Hampshire's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Hampshire does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because New Hampshire issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Hampshire→

New Jersey

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. New Jersey regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Jersey's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Jersey does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because New Jersey issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Jersey→

New Mexico

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. New Mexico regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New Mexico's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New Mexico does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because New Mexico issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New Mexico→

New York

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. New York regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is New York's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

New York does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because New York issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in New York→

North Carolina

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. North Carolina regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is North Carolina's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

North Carolina does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because North Carolina issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in North Carolina→

North Dakota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. North Dakota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is North Dakota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

North Dakota does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because North Dakota issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in North Dakota→

Ohio

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Ohio regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Ohio's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Ohio does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Ohio issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Ohio→

Oklahoma

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Oklahoma regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Oklahoma's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Oklahoma does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Oklahoma issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Oklahoma→

Oregon

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Oregon regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Oregon's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Oregon does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Oregon issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Oregon→

Pennsylvania

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Pennsylvania regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Pennsylvania's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Pennsylvania does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Pennsylvania issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Pennsylvania→

Rhode Island

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Rhode Island regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Rhode Island's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Rhode Island does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Rhode Island issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Rhode Island→

South Carolina

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. South Carolina regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is South Carolina's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

South Carolina does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because South Carolina issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in South Carolina→

South Dakota

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. South Dakota regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is South Dakota's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

South Dakota does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because South Dakota issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in South Dakota→

Tennessee

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Tennessee regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Tennessee's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Tennessee does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Tennessee issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Tennessee→

Texas

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Texas regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Texas's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Texas does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Texas issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Texas→

Utah

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Utah regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Utah's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Utah does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Utah issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Utah→

Vermont

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Vermont regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Vermont's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Vermont does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Vermont issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Vermont→

Virginia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Virginia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Virginia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Virginia does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Virginia issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Virginia→

Washington

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Washington regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Washington's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Washington does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Washington issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Washington→

West Virginia

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. West Virginia regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is West Virginia's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

West Virginia does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because West Virginia issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in West Virginia→

Wisconsin

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Wisconsin regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Wisconsin's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Wisconsin does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Wisconsin issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Wisconsin→

Wyoming

No license — state or local

No license exists for this trade at any level — state or local — in this state.

Issuing agency: No state licensing agency for glaziers. Wyoming regulates this trade through apprenticeship registration rather than occupational licensing - the relevant state office is Wyoming's apprenticeship agency (labor department or workforce development division), which registers programs rather than licensing individuals.

No state license for individual glaziers. Registered apprenticeship, typically 4 years / 8,000 hours OJT plus classroom instruction (IUPAT is the largest sponsor). High school diploma or GED is the typical entry requirement. Glazing CONTRACTORS may need a state specialty contractor license - see this dataset's carpenter record for the state'S general contractor licensing structure and thresholds.

No state license to reciprocateSecondary sources — not independently confirmed by the agency

Wyoming does not license glaziers - no US state does. This is a registered-apprenticeship trade, and the credential that travels is your U.S. Dept. Of Labor apprenticeship completion certificate, which is federally registered and valid nationwide. There's no reciprocity question here because there'S no state license to transfer. Note that a glazing contractor - as opposed to an employed glazier - may need a state specialty contractor license.

What applies instead: Because Wyoming issues no glazier license, there is no state credential to reciprocate. The DOL-registered apprenticeship certificate is portable nationwide by design - it is a federal registration, not a state one.

Sources
See all trades in Wyoming→